|
Kleemann
branded box.
|
|
|
The crusher
assembled. |
|
Optional screen
fitted.
|
|
|
Detailed
graphics. |
|
Optional side
conveyor. |
|
Screen clips
on. |
|
Heavy transport
load. |
|
On site with a
an excavator loading the hopper. |
|
The MOBIREX MR 130 Z EVO2 is a mobile impact crusher suitable for
processing blasted natural stone, asphalt and demolition
waste. The machine has a weight of about 58 tonnes
including the screening unit, and 49 tonnes without it.
It is alimited edition model in the colours of the
Italian contractor Vitali.
Packaging
The model comes in a Kleeman branded box which
has a high quality photo and technical information
about the real machine in both English and German.
Models bought from Vitali come in a Vitali branded
sleeve.
There were no defects or missing parts on the review
model.
There are three
mian elements to the model and a good colour
instruction sheet describes the assembly into a site
configuration, although not all the features of the
model are described.
Detail
This is a heavy model and the undercarriage has detail
with the plastic tracks looking good, and the metal
track frames are simple, without working rollers.
The feeding unit has metal hopper sides and is mounted
on a good structure which has the mounting springs
detailed. The Pre screen is plastic and the feed
to the side conveyor can be seen underneath. The
entrance to the crusher has rubber strips attached to
the cover to prevent
fly-out from the crusher. Safety equipment is
marked with red plastic elements.
The body sides have very sharp Kleemann graphics with
various panel details contained within the casting.
The Vitali name is appleid over grilles and the colour
scheme is striking. Plastic ladders lead up to the work platform. The
floors have diamond plated non-slip surfacing and the
handrails are metal.
The main engine enclosure is a large metal casting with
grille details.
The discharge conveyor belt is rubber and there is a detailed
drive motor at the end. A magnetic separator is
modelled in plastic.
A side conveyor is modelled
and it has a metal structure and rubber belt. It
takes oversize material from the optional screening
unit for side discharge or return to the
crusher. Another optional conveyor can be fitted
under the main screen and it also has a rubber belt.
The optional screen unit has a plastic screen, and the belt
is rubber. Drive motors and transport legs are
modelled in plastic.
Features
The plastic tracks roll well on a rough surface.
The hopper sides fold up from a transport position.
Two side access ladders have fold down sections, and
aonther under the feed hopper also folds down.
An optional side conveyor can be fitted on either side
under the main screen. It has a working belt.
The crusher cover tilts up.
The fixed side conveyor opens up and can be positioned
anywhere along a wide arc. It has a working belt.
It has a hinged end which allows the height to be
adjusted.
The magnetic separator can be lowered to be above the
main discharge conveyor.
The optional screen has a working belt and it can be
fitted to the crusher or left off.
Quality
This is a very solid and robust model with a high metal
content. Plastic elements have a very good colour
match to the metal parts.
The paint finish is high quality and is matched with
sharp graphics.
Price
The model is relatively pricey probably reflecting the
high metal content and likely lower production numbers.
Overall
This is a high quality crusher model which looks very
attractive in the colours of Vitali. It would go
well with a suitable loader model or as a load for a
heavy haulage truck.
Footnotes
This
version of the model first appeared at the end of 2021.
|
|
|
|
The parts in
the box. |
|
Profile view. |
|
Main side
conveyor can be angled.
|
|
Fold down
ladder under the hopper. |
|
View
underneath. |
|
|
Nice detailing
under the hopper. |
|
On the road. |
|
Being unloaded. |
|