 | | The box. A photo of the real crane is on the other side. |  |  | | Travelling without a hook reeved. |  | | Steering axles set at the maximum. |  | | Excellent chassis detail. |  | | 50m boom fitted. |  | | On the road with a 50m boom and Y-Guy arrangement. |  | | Hydraulic attachment points adjacent to the winch. |  | | Access ladder attached to the cab. |  | | Partially loaded counterweight. |  | | Ready to lift on the 50m boom with the sections locked at 46%. |  | | Intermediate hook fitted. Grohmann graphics on every section, and locking points at 46%, 92% and 100%. |  | | Realistic bending profile on the 84m boom when under load. |  | | Lifting tower crane sections on the 84m boom. |
|  Comment on this model.
The Liebherr 1500-8.1 mobile crane has a maximum capacity of 500 tonnes at 3m radius. It was launched at the BAUMA Exhibition in 1998 and has been a very popular heavy mobile crane.
The crane can be configured with a 50m or 84m main boom and a Y-Guy boom support arrangement and these options are possible with this version of the model.
It is in the colours of the German company Grohmann, which is no longer in business. The model has been commissioned by the German dealer Heavy Transport Models.
Packaging
The model comes in a Liebherr-branded box design with the model held within two expanded polystyrene trays.
There were no missing parts on the review model, but one outrigger was broken which was replaced by WSI.
The model has a very good instruction manual. It includes a parts list and clear photos showing the assembly of the various configurations. The only thing missing are reeving diagrams for the three hooks supplied.
There is no information about the real crane and the addition of a reprint of a brochure or technical specifications would have been fitting.
Detail
The chassis is very highly detailed and it has fully replicated transmission and suspension systems. Other detailing is high quality such as small hoses and tanks.
The tyres are very good with a fine tread pattern, and Michelin branding moulded in the sidewalls. The wheels have different hubs for driven and non-driven axles.
The driving cab has a tiny loop for hitching a hook line whilst travelling, the door steps are textured and the door handles are highlighted. Door mirrors, windscreen wipers and beacon lights complete the external detail with a generic number plate also added. Interior detailing is high quality with Liebherr printed on the seat backs and instrument stalks are tipped with colour.
Behind the driving cab the engine area is well detailed in metal and plastic, and there is a fine mesh grille. The chrome exhaust has realistic holes in the pipes and black replica rubber skirts sit above each group of wheels, with rubber mud flaps adjacent to the outrigger boxes. The Grohmann graphics are sharp and applied well.
The outrigger pads have a working pinning mechanism which allows the pads to be fixed in an offset way so they are within the footprint of the crane when the outrigger beams are retracted, and there are locking bars which keep the pads under the crane neatly. The pistons are smooth with the screw mechanism being internal so they look realistic and tiny graphics add to the authentic look. Large metal spreader plates with useable lifting points are also included with the model.
At the rear of the carrier there is a textured tool box and the lights and wheel chocks are finely detailed.
The crane cab has metal grab rails with window wipers, and there are very finely detailed lights. Cables run to the crane body and small graphics add detail to the cab exterior. The interior detail is also to a very high standard.
Underneath the crane body the slewing ring and slewing motors are realistically modelled. The crane body also benefits from the high level of detailing with small graphics and paint to add highlighting. The chrome exhaust is also fine and there are many small casting details which add to the authentic look.
The counterweight consists of a number of separate elements and each one is capable of being displayed being lifted as they have well-formed lifting points. The Liebherr name is embossed within the casting on many of the ballast plates.
The second and third winch assembly can be optionally fitted and the luffing assembly is already reeved in the factory. It is a detailed part including many hydraulic hoses and a metal walkway.
The main boom rams are very nice metal parts. Boom sections are supplied to enable the model to be displayed in either a 50m or 84m configuration. The sections appear to be aluminium as they are light and strong, and have thin wall thicknesses and hence the boom profile is excellent. Detailing on the lowest boom section includes a rotating spooling drum and useable lifting eyes, and the overall impression is very convincing although collectors may prefer to add some thread to the spooling drum. The boom head is also very good with fine detailing and silver metal pulleys which probably would have looked better painted yellow. There are 12 pulleys at the front of the boom head rather than the 13 seen in Liebherr documentation. All boom sections have Grohmann on them.
The Y-Guy system for the telescopic boom is a separate part. It is metal except for the plastic hydraulic cylinder jackets. The guy rods are metal with the body and boom head connection pieces being plastic.
Three metal hooks are supplied and they are excellent quality with metal pulleys.
Features
Axles 1 to 4 and 7 and 8 can steer as per the real crane. The range of movement is limited, and the mechanisms are a little too loose meaning that some axles cannot hold an angle if the model is pushed, although this is not an issue posing the model in a static display.
There is sprung suspension on each axle which is stiff.
The outriggers can be extended and lowered, and feature an excellent pad pinning feature with fine wire clips. The range of travel on the pistons is adequate if the spreader plates are used, and the model can be supported wheels-free.
The operator's cab rotates from the transport position can be tilted to a good angle. A tiny light assembly can be rotated and a plastic ladder can be fitted when the crane is in transport mode.
The crane rotates smoothly without rocking.
The counterweight system can be fitted in various configurations, including being mounted on the carrier deck during self-assembly.
Raising the boom is easy with the locking mechanism on the main boom rams using a key to tighten grub screws on the jacket tops.
Either the 50m or 84m boom can be fitted to the model.
Telescoping the boom is smooth and easy with a spring lock to clip each boom section. It is possible to lock each section at either 46%, 92% or 100% extension like the real crane which is an excellent feature.
The Y-Guy system can be displayed as a transport load. When in place the system performs well with each side tensioned by using the key in the slightly rough winches. A high tension can be maintained and the boom tensions up well.
The key is also used to operate the main winch. It has a push-in action but for some reason the brake is configured the opposite way to expected. So pushing engages the brake more, when it should release the brake. However it will hold a load.
Different hook blocks can be reeved. and they each have rotating hooks and working safety latches which are very stiff.
Quality
This is a very detailed model with a high metal content and the overall quality of the model is very good.
The paintwork and graphics are very good.
Price
As with all large crane models it is not cheap, but it is well worth the price.
Overall
This is a very detailed model although the engineering of the wheels and winch would still benefit from improvement. However on display this Grohmann version looks really good and it is certainly an outstanding mobile crane model.
Footnotes
The model first appeared at the BAUMA Exhibition in April 2013 and was generally available later. Versions in many different company colours have been produced.
This model was awarded Model of the Year for 2013 in the Cranes Etc Review of the Year.
|
| |
|  | | The tray. |  | | Tool box at the rear. |  | | All axles have working suspension. |  | | Impressive looking model. |  | | Tiny graphics on the boom. |  | | Excellent small details. |  | | Detailed cab with rotating light assembly at the front. |  | | Details behind the driving cab. | |
|  | | Counterweight loaded on to the carrier. |  | | Metal main boom rams. |  | | Ready to lift. |  | | Rigged with the Y-Guy attached. |  | | Full counterweight. |
|
