 |
| Mammoet
branded box.
|
 |
 |
| Impressive DAF. |
 |
|
Typical red and black decoration.
|
 |
| Lights have
plastic lenses. |
|
|
 |
| Nice deck. |
 |
| The
front outriggers. |
 |
| Extended boom. |
 |
| Lifting a
module. |
|
This truck is a DAF XD 8x2 +
Loader Crane. It is in the colours of the Dutch
lifting and heavy haulage specialist Mammoet.
Packaging
The box is
Mammoet branded and consists of a sleeve which encloses
a high quality tray.
The model is contained within foam rubber with a clear lid.
There were no missing parts or defects on the review model.
There is no information
about the real truck other than photos of it and the
fleet number on the box.
A Mammoet Collector Card is included which has a unique
serial number.
Detail
The chassis is an 8x2 arrangement and it is modelled
in detail including the gearbox. The wheels are
decorated and have different tyres on the steering and
driven axles. A drive shaft runs from the gearbox to
axle 3.
The cab has a nice light bar on the roof. At the
front the DAF grille looks good an has an exceptional
load sign in Dutch. There is a realistic number plate.
The cab's Mammoet decoration is reproduced well
and includes a fleet number.
The
deck has plastic replica timber planks and metal side
boards.
There are
simple rear stabilisers behind the rear axle.
At the back the lights have plastic lenses and there are small
graphics. There is
also a towing hitch.
The unbranded loader crane outrigger's are two-stage, and the pistons are
smooth. The base section is detailed with many
tiny graphics.
The boom sections appear to be thin-wall metal, and they
certainly have a stiff profile whilst being smooth in
operation. The final boom section has a small fixed
metal hook.
Small square spreader plates are also
included for the outriggers. A set of chains is
also included which can just about be fitted on the
hook.
A set of container locks is also included and also metal
lifting forks.
Features
There is linked steering
on the axles 1, 2 and 4, although only a very limited range of movement is possible.
The review model did not roll well due to looseness in
the linked steering.
Metal side boards can be fitted to the deck.
The cab tilts to reveal a detailed engine.
The crane outriggers are stored in the upright
position and can be telescoped out and rotated, and the
piston lowered. These are not really load bearing.
The rear stabilisers can be lowered.
The crane rotates smoothly and the boom unfolds with the
rams holding a pose in most extensions. The boom has many telescoping sections
which extend well.
Quality
This model is well made with a high metal content.
The paintwork is very good with excellent graphics.
Price
The model is reasonable value.
Overall
This is another good looking Mammoet model by WSI.
The detailing and most functionality is very good, with
just the steering working not so well.
Footnotes
This model first appeared in October 2026 in a
run of 600 models.
|
|
 |
|
|
 |
| The parts and
collector card. |
 |
|
Profile view. |
 |
| Side boards
fitted. |
 |
| Detailed
chassis. |
 |
| Detailed
graphics. |
 |
| Tilting cab. |
 |
| Good looking. |
|
|
 |
| Nice mini
dioramas are possible. |
 |
| Loaded. |
|