 |
| The box. |
 |
| The LR 1750
attached to Goldhofer modules. |
 |
 |
| Heavy load
causes the rear axles to lift a little so they are best
pulled down. |
 |
| Interesting
heavy haulage make a good display. |
 |
| Long rear
module means the crane does not overhang. |
 |
| Front adaptor
is not pinned as the early version of the LG 1750 used
here does not have forward lugs. |
|
This kit comprises transport
adaptors for the
Liebherr LG 1750 Mobile Crane and the
Liebherr LR 1750
Crawler Crane.
It is in Liebherr yellow.
Packaging
The kit comes in a small Conrad branded box with a sticker indicating that it contains
the parts.
The parts are packed within foam rubber and are wrapped,
and the
review set had no defects or missing parts.
No instructions are supplied.
Detail
and Features
The adaptors for the LG 1750 version consists of two
supports which can be pinned to the body of the crane
and provide a level footing on a trailer. The
parts are metal and fairly simple. Early versions
of the LG 1750 may not have the front connection lugs,
but the adaptors are still useable.
The adaptors for the LR 1750 comprise two brackets which
connect the undercarriage to Goldhofer modules.
The parts are metal and plastic pins are used to connect
to the modules and the crane.
Quality
and Price
All of the metal parts are of a robust quality and are
painted well. As with many accessories they are not
cheap.
Overall
This kit is a good addition to enable display of the
base models in transport configuration and are
recommended for this purpose.
Footnotes
The part was first made in Felbermayr colours and
appeared in 2009. |
|
|
|
 |
| The parts out
of the box. |
 |
| Ground
clearance is tight, but for more realism the support
pads could be removed from the 'small' outriggers. |
 |
| Impressive
haulage vehicle
and load. |
 |
| Adaptors are
attached to the crane with large plastic pins. |
 |
| The LG 1750
supported on a flat bed. |
 |
| Impressive load
for a Goldhofer
trailer. |
 |
| Sturdy support
frame. |
|
